Precautions for safe operation of fruit juice beverage filling machine

Views: 415 Author: Site Editor Publish Time: Origin: Site

The fruit juice beverage filling machine is a beverage filling machine, which can fill carbonated beverages, soda water, salt soda and other carbonated beverages, and can also be used for filling juice beverages, purified water and other non-carbonated beverages. The fruit juice beverage filling machine is filled under the pressure of the bottle lower than the atmospheric pressure, suitable for liquids of various viscosities, such as oil, syrup, fruit wine and so on.

 

Juice beverage filling machine

 

The use of a beverage filling machine for beverage filling can greatly improve the filling efficiency, but you need to pay attention to safety when operating the machine.

 

Before use, you need to test run, by observing whether the three-phase motor is running in the correct direction, whether the pressure of the filling machine is normal, whether the motor and bearings are running normally, whether you need to add lubricating oil, and also need to pay attention to the firmness of each part of the beverage filling machine Whether the pieces are loose.

 

When the juice beverage filling machine passes the pre-use inspection, it can be used. Pay attention to whether the safety equipment functions normally during use. Before restarting after each shutdown, check whether there is any abnormality in the water tank, chain plate, conveyor belt, storage cover box, etc., and pay attention to whether the water source, power source, and air source are connected.

 

After checking that the equipment is unobstructed, turn on the main power QF again, the power indicator is on, and the fault indicator and emergency stop indicator are off before you can press the start button on the operation control box and the start switch at the filling point to start the machine For the overall operation, to stop the machine operation, you need to press the stop button at the filling place and the control box, and turn off the main power supply after stopping.

 juice filling machine

In the entire juice beverage filling machine, the operation control box is used as the equipment to control the beverage filling machine. In the past, the design or use of the large-size box was generally designed. This is mainly for safety considerations to ensure that the staff During operation control, no safety accidents will be caused due to performance problems of the operation control box.

 

1. During production, always observe the mechanical parts to see whether the rotation and lifting are normal, whether there are abnormalities, and whether the screws are loose;

 

2. Check the ground wire of the equipment, and the contact requirements are reliable; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking or whether the air pipe is broken;

 

3. Change the lubricating oil (grease) of the reducer motor every year, check the tightness of the chain, and adjust the tension in time;

 

4. If it is not used for a long time, empty the material in the pipeline;

 

5. Do a good job of cleaning and sanitation, keep the surface of the machine clean, frequently remove the accumulated material on the scale body, and pay attention to keeping the electric control cabinet clean;

 

6. The sensor is a high-precision, high-sealing, and high-sensitivity device. It is strictly prohibited from impact and overload, and no contact during work, and no disassembly unless required for maintenance.

 

If you encounter other problems during the operation, please feel free to communicate with us. We are a professional beverage machinery manufacturer and can solve any beverage machinery problems for you.


×

Contact Us

captcha