Copyright © 2019 ZhangJiaGang JST Machinery Co.,Ltd.All rights reserved. Site Map Designed byiwonder.cn
Tel: +86-135 8442 1186
Email: admin@jstmachinery.com
This is 18-18-6 rinsing filling capping machine for water . Filling speed for 500ml : maximum can be 6000 bottles per hour . Suitable bottle size ；200ml-2000ml
Bottle lowing machine → CGF 18-18-6rinsing filling capping machine → PVC sleeve labeling machine → date printer →PE film shrink packing machine
Model | CGF8-8-3 | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 |
Capacity(500ml)(b/h) | 0-2000 | 0-4000 | 0-6000 | 0-10000 | 0-14000 |
Filling precision | ≤±5MM | ≤±5MM | ≤±5MM | ≤±5MM | ≤±5MM |
Water pressure | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 |
Gas pressure | 0.6(Mpa) | 0.6(Mpa) | 0.6 | 0.6 | 0.6 |
Weight | 2000 | 2500 | 3000 | 4000 | 5000 |
Size (mm) | 2200×1600×1900 | 2400x1650x2050 | 2800×1800×2200 | 3000×2180×2200 | 3600×2800×3150 |
The outset of rinsing can be adjusted by adjusting the angles of water distribution valve
All is made up of stainless steel 304 .
Under the machine ,there will be SS304 pipes to connect the waste water to water collecting tank.
Air conveyor belt photos before rinsing part (The motor on the air fan, it is ABB brand )
Filling speed for 500ml : maximum can be 6000 bottles per hour .
Suitable bottle size ；200ml-2000ml
Power :5.75kw kw
If the liquid level in bottle is not proper, the position of filling must be adjusted by adding or decreasing the adjusting gasket to high or low the position respectively.
All the motor, they are ABB type ,high quality ,even the motor on the air fan .
And under the machine ,the speed reducer and the motor ,they are combined ,without belt connect.
(ABB motor )
Touch screen photos:(Siemens )
Screw capping machine is most precision part in the 3-1 machine,it has a big influence to the goods stability and defective rate. our screw capping has following feature.
It has cap clelaning tunnel and cap elevator together. (The cap elevator ,it is lift sending type ,not air sending type )
Now our new design for three in one machine is like the followings :
Usually we will pack the machines by using wrapping film first ,please check the following photos :
And then we will pack the machines by using standard export wooden cases :
At last ,we will load all the machines into container :
Usually our client will go to pick up our engineer at the airport, and take him to the factory :
The machines will be connected by conveyor belt first ,and then engineer will begin to install:
Sometimes ,client will come to discuss the detail with use before placing the order :
